Tile polishing restores shine to suitable tile and stone floors, such as mosaic, terrazzo, natural stone and some through-body tiles, by grinding away surface scratches and dullness and then sealing the surface. Tile cleaning only removes dirt, scale and grout stains. Glazed ceramic and glazed vitrified tiles are usually cleaned, not polished. EFCS checks your tile photos first, then quotes for the service the floor actually needs.
Service: Tile polishing and tile deep cleaning, including grout, for homes and offices.
City: Bangalore.
Price: Quoted after you send photos or after a site check. EFCS does not publish a fixed rate per square foot.
Time: Depends on area, tile type and condition. Your quote includes an estimate.
Hours: Monday to Saturday, 10 AM to 7 PM. Sunday by appointment only.
Contact: +91 89043 12966, +91 88480 72224 or WhatsApp.
A dull-looking tile floor does not always need polishing. In many homes, a professional deep clean is enough to remove built-up dirt, scale, residue and grout stains. The right service depends on the tile material, its surface finish and its condition. EFCS checks these details before recommending cleaning or polishing.
Tile deep cleaning removes dirt, residue, scale, soap deposits and grout stains from the tile surface and grout lines. It does not refinish the tile itself.
Tile polishing is a surface-refinishing process for suitable materials. It can involve controlled grinding or honing, polishing and sealing to improve the appearance of a worn or scratched floor. Not every tile can safely be ground or polished.
| Tile deep cleaning | Tile polishing |
|---|---|
| Removes dirt, residue, scale and grout stains | Refinishes a worn or scratched surface |
| Works on most tile types, with the right cleaner and method | Only tile and stone that can safely be ground |
| Does not change the tile itself | A thin layer of the surface is refinished |
| Cleans grout lines | Does not replace grout cleaning or repair |
| Always start here | Only if the floor is still dull after deep cleaning |
Read our guide: Tile cleaning vs tile polishing: which does your floor need? You can also explore our one-time deep cleaning services.
Tile construction and surface finish matter. A tile that looks like stone may have a surface coating that should not be ground. The following is a general guide; EFCS confirms suitability before recommending polishing.
| Floor type | Usual service | Note |
|---|---|---|
| Glazed ceramic tile | Deep cleaning | Grinding destroys the glaze. It is not polished. |
| Glazed vitrified tile | Deep cleaning | Usually cleaned, not ground. Confirm the exact tile and finish. |
| Through-body (full-body) tile | Cleaning, or polishing after assessment | Depends on tile construction and manufacturer's guidance. |
| Mosaic | Polishing is often possible | Needs a check of material and condition. See mosaic polishing. |
| Terrazzo | Polishing is often possible | Never use acid. See terrazzo floor polishing and care. |
| Natural stone (marble, granite and similar) | Polishing is often possible | Requires a stone-specific method. Acid can etch marble. See marble restoration and polishing. |
For more information, read why natural stone does not always polish evenly.
If a tile is not suitable for polishing, the work may instead involve assessment, deep cleaning of the surface and grout, rinsing and a final check. Read about common grouting problems.
EFCS does not publish a fixed rate per square foot because two floors of the same size can need very different work. The quote depends on:
Send photos and the approximate area on WhatsApp, or arrange a site check, so the team can assess the work and provide a quote.
Time depends on the floor area, tile type, condition and whether grinding or sealing is needed. A small area takes less time than a full home. Ask the team to include a time estimate in your quote and to explain when the floor can be walked on or used again, especially after sealing.
If you are unsure, send clear photos. EFCS can advise whether a site check is needed before quoting.
EFCS provides tile polishing and tile deep cleaning services for homes, apartments and offices in Bangalore. Contact the team to discuss your floor and arrange an assessment.
Address: 49/1, 1st Main Road, Palace Guttahalli, Bangalore 560003.
Hours: Monday to Saturday, 10 AM to 7 PM. Sunday by appointment only.
Phone: +91 89043 12966 / +91 88480 72224.
Email: vinesh@efcs.co.in.
Tile cleaning removes dirt, soap scum, scale, wax build-up and grout stains. It does not change the tile itself. Tile polishing grinds and refinishes the surface of a suitable tile that is worn, scratched or dull, and then seals it. Cleaning comes first. Polishing is needed only if the floor is still dull after a proper deep clean.
The cost depends on the tile type, the floor area, the condition of the surface and whether grinding, grout work or sealing is needed. EFCS does not publish a fixed rate per square foot, because two floors of the same size can need very different work. Send photos on WhatsApp or call +91 89043 12966 and the team will give you a quote.
Time depends on the area, the tile type and how much grinding is needed. A small area takes less time than a full home. Ask the team for the time estimate in your quote, and follow their advice on when the floor can be used again, especially after sealing.
Glazed ceramic and glazed vitrified tiles have a thin glass-like layer on top. Grinding it can permanently damage the finish, so these tiles are normally deep cleaned, not polished. Some through-body tiles may be suitable after an assessment. Mosaic, terrazzo and natural stone are the floors most often polished.
There is no fixed interval. It depends on foot traffic, water quality and the room. Bathrooms, kitchens and entrances get dirty faster. Many homes find a professional deep clean useful about once a year, or sooner if grout darkens or a film appears. Polish only when the surface itself is worn.
Cleaning with a tile-safe product and a soft brush is fine for light dirt. Polishing needs grinding machines and the right method for the material, and a wrong choice can scratch or etch the floor. Never use acid on marble, limestone, travertine or terrazzo. For polishing, hire a professional who checks the tile first.
Information on this page is general guidance. Floor suitability depends on the material, finish and condition and must be confirmed from photos or a site assessment. Never use acid on marble, limestone, travertine or terrazzo. Never mix bleach with acid cleaners.
Published: 12 November 2026 | By EFCS Team