Concrete floors are strong and practical, but bare concrete quickly becomes dusty, stained and dull under daily traffic. Concrete floor polishing transforms that surface into a dense, smooth and glossy floor that is easy to clean and built to last. At Excellent Facility Connect Services (EFCS), we offer professional concrete grinding, densifying and polishing services in Bangalore for warehouses, factories, showrooms, offices, parking areas and homes.
Using industrial grinders with diamond tooling, we remove old coatings, adhesives, stains and surface unevenness to create a clean, level base for polishing.
We apply a penetrating densifier that reacts with the concrete to harden the surface, reduce dusting and improve resistance to wear and abrasion.
Choose from matte, satin or high-gloss finishes. Our step-by-step polishing with progressively finer diamonds brings out a smooth, reflective surface.
Cracks, joints, chips and pitted areas are repaired and filled before polishing, giving tired or damaged concrete floors a uniform new look.
A protective stain guard seals the polished surface against oil, water and everyday spills, keeping the floor dust-free and easy to maintain.
Periodic cleaning, burnishing and re-polishing keep high-traffic floors looking their best and extend the life of your polished concrete.
We assess the concrete for hardness, moisture, cracks and existing coatings, then recommend the right grinding approach and finish for your space.
Old coatings and contaminants are removed, and cracks and holes are filled so the floor is ready for a consistent finish.
Coarse diamond tooling opens up the surface and levels high spots, with dust-controlled equipment to keep the work area clean.
A liquid densifier is applied to harden and strengthen the concrete surface from within.
The floor is honed and polished with progressively finer diamond pads until the chosen level of sheen is achieved.
We apply a protective guard, burnish the floor and inspect the result with you, along with simple tips to maintain the finish.
Our trained technicians handle residential, commercial and industrial concrete floors with care and attention to detail.
We use modern grinders, diamond tooling and dust-controlled systems for efficient, high-quality results.
From a natural matte look to a mirror-like gloss, we tailor the finish to how your space is used.
Polished concrete makes use of the existing slab, and we use low-VOC products that are safe for people and the environment.
Clear quotes, on-time work and a final inspection with you, because our job is done only when you are happy with the floor.
Get expert concrete floor polishing in Bangalore today!
Book NowA: With routine cleaning and periodic re-buffing, a properly densified and polished concrete floor can last for many years. High-traffic areas may need a light re-polish every one to two years to keep the shine.
A: Yes. Most existing concrete floors can be polished. We first repair cracks, fill holes and grind away old coatings, stains and surface damage before densifying and polishing.
A: No. Polished concrete is generally no more slippery than other smooth floors when it is clean and dry. We can choose a matte or satin finish and apply anti-slip treatments for areas exposed to water or oil.
A: It depends on the area, the condition of the concrete and the finish you choose. Most residential and small commercial jobs take one to three days, and the floor can usually be walked on soon after work is completed.
A: Polished concrete is the concrete itself, ground, hardened and polished, so there is no coating to peel. Epoxy is a resin layer applied on top of the concrete. Polished concrete needs less upkeep, while epoxy offers more colours and chemical resistance.